IDs and information for Ocamuscledeformer

Ocamuscledeformer

Attributes

• ENGLISH NAME : MSkin
• NAME : Ocamuscledeformer
• INCLUDE : Obase
• PATH : ca/description/ocamuscledeformer.res
• PLUGIN : ca
• MAXON online help (may not exist): OCAMUSCLEDEFORMER

Elements

ID	UI Name	Type	Parameters	Cycle
ID_CA_MUSCLE_DEFORMER_PULL_STRENGTH	Pull	REAL	UNIT PERCENT MINSLIDER 0.0 MAXSLIDER 100.0 CUSTOMGUI REALSLIDER
ID_CA_MUSCLE_DEFORMER_SLIDE_STRENGTH	Slide	REAL	UNIT PERCENT MINSLIDER 0.0 MAXSLIDER 100.0 CUSTOMGUI REALSLIDER
ID_CA_MUSCLE_DEFORMER_FAT_OFFSET	FatOffset	REAL	UNIT METER MIN 0.0 MAXSLIDER 100.0 CUSTOMGUI REALSLIDER
ID_CA_MUSCLE_DEFORMER_INIT	Initialize	BUTTON
ID_CA_MUSCLE_DEFORMER_FREE	Clear	BUTTON
ID_CA_MUSCLE_DEFORMER_DISTANCE	Distance	REAL	UNIT METER MIN 0.0 MAXSLIDER 1000.0 CUSTOMGUI REALSLIDER SCALE_H
ID_CA_MUSCLE_DEFORMER_PULL_MODE	PullMode	LONG	PARENTCOLLAPSE	ID_CA_MUSCLE_DEFORMER_PULL_MODE_REL Relative ID_CA_MUSCLE_DEFORMER_PULL_MODE_ABS Absolute
ID_CA_MUSCLE_DEFORMER_PULL_CURVE	PullFall-Off	SPLINE	PARENTCOLLAPSE
ID_CA_MUSCLE_DEFORMER_STRETCH	Stretch	BOOL
ID_CA_MUSCLE_DEFORMER_STRETCH_STRENGTH	Strength	REAL	UNIT PERCENT MIN 0.0 MAX 100.0 CUSTOMGUI REALSLIDER
ID_CA_MUSCLE_DEFORMER_STRETCH_ITERATIONS	Iterations	LONG	MIN
ID_CA_MUSCLE_DEFORMER_STRETCH_STIFFNESS	Stiffness	REAL	UNIT PERCENT MIN 0.0 MAX 100.0 CUSTOMGUI REALSLIDER
ID_CA_MUSCLE_DEFORMER_OBJECT_LIST	Objects	IN_EXCLUDE	NUM_FLAGS 0 INIT_STATE 0 SEND_SELCHNGMSG 1 SCALE_V ANIM OFF

Example Code

The following code does not use the correct values when setting the data. You should check directly in C4D for the correct values that you should use in place of the ones that are shown. This code is just to show you how to access the values for getting and setting the parameters.

Python

import c4d
from c4d import gui
def main():
    obj = c4d.BaseObject(c4d.Ocamuscledeformer)
    doc.InsertObject(obj)
    c4d.EventAdd(c4d.EVENT_FORCEREDRAW)
    
    #You can set parameters two different ways. 
    #First way              
    obj[c4d.ID_CA_MUSCLE_DEFORMER_PULL_STRENGTH] = 0.1
    obj[c4d.ID_CA_MUSCLE_DEFORMER_SLIDE_STRENGTH] = 0.1
    obj[c4d.ID_CA_MUSCLE_DEFORMER_FAT_OFFSET] = 0.1
    obj[c4d.ID_CA_MUSCLE_DEFORMER_DISTANCE] = 0.1
    obj[c4d.ID_CA_MUSCLE_DEFORMER_PULL_MODE] = c4d.ID_CA_MUSCLE_DEFORMER_PULL_MODE_REL
    obj[c4d.ID_CA_MUSCLE_DEFORMER_STRETCH] = True
    obj[c4d.ID_CA_MUSCLE_DEFORMER_STRETCH_STRENGTH] = 0.1
    obj[c4d.ID_CA_MUSCLE_DEFORMER_STRETCH_ITERATIONS] = 1
    obj[c4d.ID_CA_MUSCLE_DEFORMER_STRETCH_STIFFNESS] = 0.1
    
    #Second way, using the base container.
    bc = obj.GetDataInstance()
    bc.SetFloat(c4d.ID_CA_MUSCLE_DEFORMER_PULL_STRENGTH,0.1)
    bc.SetFloat(c4d.ID_CA_MUSCLE_DEFORMER_SLIDE_STRENGTH,0.1)
    bc.SetFloat(c4d.ID_CA_MUSCLE_DEFORMER_FAT_OFFSET,0.1)
    bc.SetFloat(c4d.ID_CA_MUSCLE_DEFORMER_DISTANCE,0.1)
    bc.SetInt32(c4d.ID_CA_MUSCLE_DEFORMER_PULL_MODE,c4d.ID_CA_MUSCLE_DEFORMER_PULL_MODE_REL)
    bc.SetBool(c4d.ID_CA_MUSCLE_DEFORMER_STRETCH,True)
    bc.SetFloat(c4d.ID_CA_MUSCLE_DEFORMER_STRETCH_STRENGTH,0.1)
    bc.SetInt32(c4d.ID_CA_MUSCLE_DEFORMER_STRETCH_ITERATIONS,1)
    bc.SetFloat(c4d.ID_CA_MUSCLE_DEFORMER_STRETCH_STIFFNESS,0.1)

if __name__=='__main__':
    main()
             

C++

#include "c4d.h"
#include "../ca/description/ocamuscledeformer.h"
void SampleFunction()
{
    BaseDocument *pDoc = GetActiveDocument();
    BaseObject *pObject = BaseObject::Alloc(Ocamuscledeformer);
    pDoc->InsertObject(pObject);
    pDoc->StartUndo();
    pDoc->AddUndo(UNDO_NEW,pObject);
    pDoc->EndUndo();
    EventAdd(EVENT_FORCEREDRAW);
    
    //You can set parameters two different ways. 

    //First way              
    //Some objects do not store all their data in the container. You need to use GetParameter()/SetParameter() instead. 

    DESCFLAGS_SET flags = DESCFLAGS_SET_PARAM_SET;
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_PULL_STRENGTH),GeData(0.1),flags);
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_SLIDE_STRENGTH),GeData(0.1),flags);
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_FAT_OFFSET),GeData(0.1),flags);
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_DISTANCE),GeData(0.1),flags);
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_PULL_MODE),GeData(ID_CA_MUSCLE_DEFORMER_PULL_MODE_REL),flags);
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_STRETCH),GeData(true),flags);
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_STRETCH_STRENGTH),GeData(0.1),flags);
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_STRETCH_ITERATIONS),GeData(1),flags);
    pObject->SetParameter(DescID(ID_CA_MUSCLE_DEFORMER_STRETCH_STIFFNESS),GeData(0.1),flags);
    pObject->Message(MSG_UPDATE);            

    //Second way, using the base container.
    BaseContainer *bc =     pObject->GetDataInstance();
    bc->SetFloat(ID_CA_MUSCLE_DEFORMER_PULL_STRENGTH,0.1);
    bc->SetFloat(ID_CA_MUSCLE_DEFORMER_SLIDE_STRENGTH,0.1);
    bc->SetFloat(ID_CA_MUSCLE_DEFORMER_FAT_OFFSET,0.1);
    bc->SetFloat(ID_CA_MUSCLE_DEFORMER_DISTANCE,0.1);
    bc->SetInt32(ID_CA_MUSCLE_DEFORMER_PULL_MODE,ID_CA_MUSCLE_DEFORMER_PULL_MODE_REL);
    bc->SetBool(ID_CA_MUSCLE_DEFORMER_STRETCH,true);
    bc->SetFloat(ID_CA_MUSCLE_DEFORMER_STRETCH_STRENGTH,0.1);
    bc->SetInt32(ID_CA_MUSCLE_DEFORMER_STRETCH_ITERATIONS,1);
    bc->SetFloat(ID_CA_MUSCLE_DEFORMER_STRETCH_STIFFNESS,0.1);
    pObject->Message(MSG_UPDATE);                                                      
}
             

Buttons

This node has buttons. Buttons can manually be executed by calling the following code

Python

c4d.CallButton(obj,c4d.ID_CA_MUSCLE_DEFORMER_INIT)
c4d.CallButton(obj,c4d.ID_CA_MUSCLE_DEFORMER_FREE)

C++

DescriptionCommand dc;
dc.id = DescID(ID_CA_MUSCLE_DEFORMER_INIT);             
pObject->Message(MSG_DESCRIPTION_COMMAND, &dc);


DescriptionCommand dc;
dc.id = DescID(ID_CA_MUSCLE_DEFORMER_FREE);             
pObject->Message(MSG_DESCRIPTION_COMMAND, &dc);