IDs and information for Omdynpart

Omdynpart

Attributes

• ENGLISH NAME : X-ParticlesDynamicParticlesModifier
• NAME : Omdynpart
• INCLUDE : Obase
• PATH : res/description/omdynpart.res
• PLUGIN : X-Particles
• MAXON online help (may not exist): OMDYNPART

Elements

ID	UI Name	Type	Parameters	Cycle
XMDP_DYNPART_ENABLED	Enabled	BOOL
XMDP_DYNPART_MODE	Mode	LONG		DYNPART_MODE_INDEP Independent DYNPART_MODE_ACTION Action-Controlled
XMDP_DYNPART_EMITTER	SpawningEmitter	LINK
XMDP_DYNPART_MAXCOUNT	Max.Count	LONG	MIN 0 MINSLIDER 0 MAXSLIDER 100 CUSTOMGUI LONGSLIDER
XMDP_DYNPART_FRAMECOUNT	CountPerFrame	LONG	MIN 0 MINSLIDER 0 MAXSLIDER 100 CUSTOMGUI LONGSLIDER
XMDP_DYNPART_FRAMECOUNT_VAR	Variation	LONG	MIN 0 MINSLIDER 0 MAXSLIDER 100 CUSTOMGUI LONGSLIDER
XMDP_DYNPART_OFFSET	Offset	REAL	UNIT METER MIN 0.0 MINSLIDER 0.0 MAXSLIDER 100.0 CUSTOMGUI REALSLIDER
XMDP_DYNPART_OFFSET_PLANE	OffsetPlane	LONG		DYNPART_OFFSET_PLANE_NONE None DYNPART_OFFSET_PLANE_XY XY DYNPART_OFFSET_PLANE_XZ XZ DYNPART_OFFSET_PLANE_YZ YZ
XMDP_DYNPART_OFFSET_PLANE_LOCAL	LocalObjectPlane	BOOL
XMDP_DYNPART_OFFSET_PLANE_OBJECT	Object	LINK
XMDP_DYNPART_SPEEDMODE	SpeedMode	LONG		DYNPART_SPEEDMODE_INHERIT InheritfromSource DYNPART_SPEEDMODE_ABS Absolute
XMDP_DYNPART_SPLINE_IN	FadeIn	SPLINE	Y_MIN 0.0 Y_MAX 1.0 X_MIN 0.0 X_MAX 1.0 X_STEPS 0.01 Y_STEPS 0.01
XMDP_DYNPART_STEPS_IN	FadeinSteps	LONG	MIN 1 MINSLIDER 1 MAXSLIDER 100 CUSTOMGUI LONGSLIDER
XMDP_DYNPART_SPLINE_OUT	FadeOut	SPLINE	Y_MIN 0.0 Y_MAX 1.0 X_MIN 0.0 X_MAX 1.0 X_STEPS 0.01 Y_STEPS 0.01
XMDP_DYNPART_STEPS_OUT	FadeOutSteps	LONG	MIN 1 MINSLIDER 1 MAXSLIDER 100 CUSTOMGUI LONGSLIDER
XMDP_DYNPART_GROUP	Groups	IN_EXCLUDE	NUM_FLAGS 2 INIT_STATE 3 SEND_SELCHNGMSG 1 SCALE_V IMAGE_01_ON 1009316 IMAGE_01_OFF 1009320 IMAGE_02_ON 300000231 IMAGE_02_OFF 300000230

Example Code

The following code does not use the correct values when setting the data. You should check directly in C4D for the correct values that you should use in place of the ones that are shown. This code is just to show you how to access the values for getting and setting the parameters.

Python

import c4d
from c4d import gui
def main():
    obj = c4d.BaseObject(c4d.Omdynpart)
    doc.InsertObject(obj)
    c4d.EventAdd(c4d.EVENT_FORCEREDRAW)
    
    #You can set parameters two different ways. 
    #First way              
    obj[c4d.XMDP_DYNPART_ENABLED] = True
    obj[c4d.XMDP_DYNPART_MODE] = c4d.DYNPART_MODE_INDEP
    obj[c4d.XMDP_DYNPART_MAXCOUNT] = 1
    obj[c4d.XMDP_DYNPART_FRAMECOUNT] = 1
    obj[c4d.XMDP_DYNPART_FRAMECOUNT_VAR] = 1
    obj[c4d.XMDP_DYNPART_OFFSET] = 0.1
    obj[c4d.XMDP_DYNPART_OFFSET_PLANE] = c4d.DYNPART_OFFSET_PLANE_NONE
    obj[c4d.XMDP_DYNPART_OFFSET_PLANE_LOCAL] = True
    obj[c4d.XMDP_DYNPART_SPEEDMODE] = c4d.DYNPART_SPEEDMODE_INHERIT
    obj[c4d.XMDP_DYNPART_STEPS_IN] = 1
    obj[c4d.XMDP_DYNPART_STEPS_OUT] = 1
    
    #Second way, using the base container.
    bc = obj.GetDataInstance()
    bc.SetBool(c4d.XMDP_DYNPART_ENABLED,True)
    bc.SetInt32(c4d.XMDP_DYNPART_MODE,c4d.DYNPART_MODE_INDEP)
    bc.SetInt32(c4d.XMDP_DYNPART_MAXCOUNT,1)
    bc.SetInt32(c4d.XMDP_DYNPART_FRAMECOUNT,1)
    bc.SetInt32(c4d.XMDP_DYNPART_FRAMECOUNT_VAR,1)
    bc.SetFloat(c4d.XMDP_DYNPART_OFFSET,0.1)
    bc.SetInt32(c4d.XMDP_DYNPART_OFFSET_PLANE,c4d.DYNPART_OFFSET_PLANE_NONE)
    bc.SetBool(c4d.XMDP_DYNPART_OFFSET_PLANE_LOCAL,True)
    bc.SetInt32(c4d.XMDP_DYNPART_SPEEDMODE,c4d.DYNPART_SPEEDMODE_INHERIT)
    bc.SetInt32(c4d.XMDP_DYNPART_STEPS_IN,1)
    bc.SetInt32(c4d.XMDP_DYNPART_STEPS_OUT,1)

if __name__=='__main__':
    main()
             

C++

#include "c4d.h"
#include "../res/description/omdynpart.h"
void SampleFunction()
{
    BaseDocument *pDoc = GetActiveDocument();
    BaseObject *pObject = BaseObject::Alloc(Omdynpart);
    pDoc->InsertObject(pObject);
    pDoc->StartUndo();
    pDoc->AddUndo(UNDO_NEW,pObject);
    pDoc->EndUndo();
    EventAdd(EVENT_FORCEREDRAW);
    
    //You can set parameters two different ways. 

    //First way              
    //Some objects do not store all their data in the container. You need to use GetParameter()/SetParameter() instead. 

    DESCFLAGS_SET flags = DESCFLAGS_SET_PARAM_SET;
    pObject->SetParameter(DescID(XMDP_DYNPART_ENABLED),GeData(true),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_MODE),GeData(DYNPART_MODE_INDEP),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_MAXCOUNT),GeData(1),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_FRAMECOUNT),GeData(1),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_FRAMECOUNT_VAR),GeData(1),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_OFFSET),GeData(0.1),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_OFFSET_PLANE),GeData(DYNPART_OFFSET_PLANE_NONE),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_OFFSET_PLANE_LOCAL),GeData(true),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_SPEEDMODE),GeData(DYNPART_SPEEDMODE_INHERIT),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_STEPS_IN),GeData(1),flags);
    pObject->SetParameter(DescID(XMDP_DYNPART_STEPS_OUT),GeData(1),flags);
    pObject->Message(MSG_UPDATE);            

    //Second way, using the base container.
    BaseContainer *bc =     pObject->GetDataInstance();
    bc->SetBool(XMDP_DYNPART_ENABLED,true);
    bc->SetInt32(XMDP_DYNPART_MODE,DYNPART_MODE_INDEP);
    bc->SetInt32(XMDP_DYNPART_MAXCOUNT,1);
    bc->SetInt32(XMDP_DYNPART_FRAMECOUNT,1);
    bc->SetInt32(XMDP_DYNPART_FRAMECOUNT_VAR,1);
    bc->SetFloat(XMDP_DYNPART_OFFSET,0.1);
    bc->SetInt32(XMDP_DYNPART_OFFSET_PLANE,DYNPART_OFFSET_PLANE_NONE);
    bc->SetBool(XMDP_DYNPART_OFFSET_PLANE_LOCAL,true);
    bc->SetInt32(XMDP_DYNPART_SPEEDMODE,DYNPART_SPEEDMODE_INHERIT);
    bc->SetInt32(XMDP_DYNPART_STEPS_IN,1);
    bc->SetInt32(XMDP_DYNPART_STEPS_OUT,1);
    pObject->Message(MSG_UPDATE);                                                      
}