IDs and information for Opolyreduxgen

Opolyreduxgen

Attributes

• ENGLISH NAME : PolygonReductionGenerator
• NAME : Opolyreduxgen
• INCLUDE : Obase
• PATH : mkmodeler/description/opolyreduxgen.res
• PLUGIN : mkmodeler
• MAXON online help (may not exist): OPOLYREDUXGEN

Elements

ID	UI Name	Type	Parameters	Cycle
POLYREDUXOBJECT_REDUCE_ALL_AS_ONE	Reduceallgeneratorchildrenasoneobject	BOOL	ANIM
POLYREDUXOBJECT_STRENGTH	ReductionStrength	REAL	MIN 0.0 MAX 100.0 UNIT PERCENT CUSTOMGUI REALSLIDER
POLYREDUXOBJECT_TRIANGLE_COUNT	TriangleCount	LONG	MIN 0 ANIM OFF
POLYREDUXOBJECT_VERTEX_COUNT	VertexCount	LONG	MIN 0 ANIM OFF
POLYREDUXOBJECT_REMAINING_EDGES_COUNT	RemainingEdges	LONG	MIN 0 ANIM OFF
POLYREDUXOBJECT_PRESERVE_3D_BOUNDARY	Preserve3DBoundaries	BOOL	ANIM
POLYREDUXOBJECT_PRESERVE_UV_BOUNDARY	PreserveUVBoundaries	BOOL	ANIM
POLYREDUXOBJECT_REDUCE_BOUNDARY_ANGLE	BoundaryReductionAngle	REAL	UNIT DEGREE MIN 0.0 MAX 180.0 ANIM OFF

Example Code

The following code does not use the correct values when setting the data. You should check directly in C4D for the correct values that you should use in place of the ones that are shown. This code is just to show you how to access the values for getting and setting the parameters.

Python

import c4d
from c4d import gui
def main():
    obj = c4d.BaseObject(c4d.Opolyreduxgen)
    doc.InsertObject(obj)
    c4d.EventAdd(c4d.EVENT_FORCEREDRAW)
    
    #You can set parameters two different ways. 
    #First way              
    obj[c4d.POLYREDUXOBJECT_REDUCE_ALL_AS_ONE] = True
    obj[c4d.POLYREDUXOBJECT_STRENGTH] = 0.1
    obj[c4d.POLYREDUXOBJECT_TRIANGLE_COUNT] = 1
    obj[c4d.POLYREDUXOBJECT_VERTEX_COUNT] = 1
    obj[c4d.POLYREDUXOBJECT_REMAINING_EDGES_COUNT] = 1
    obj[c4d.POLYREDUXOBJECT_PRESERVE_3D_BOUNDARY] = True
    obj[c4d.POLYREDUXOBJECT_PRESERVE_UV_BOUNDARY] = True
    obj[c4d.POLYREDUXOBJECT_REDUCE_BOUNDARY_ANGLE] = 0.1
    
    #Second way, using the base container.
    bc = obj.GetDataInstance()
    bc.SetBool(c4d.POLYREDUXOBJECT_REDUCE_ALL_AS_ONE,True)
    bc.SetFloat(c4d.POLYREDUXOBJECT_STRENGTH,0.1)
    bc.SetInt32(c4d.POLYREDUXOBJECT_TRIANGLE_COUNT,1)
    bc.SetInt32(c4d.POLYREDUXOBJECT_VERTEX_COUNT,1)
    bc.SetInt32(c4d.POLYREDUXOBJECT_REMAINING_EDGES_COUNT,1)
    bc.SetBool(c4d.POLYREDUXOBJECT_PRESERVE_3D_BOUNDARY,True)
    bc.SetBool(c4d.POLYREDUXOBJECT_PRESERVE_UV_BOUNDARY,True)
    bc.SetFloat(c4d.POLYREDUXOBJECT_REDUCE_BOUNDARY_ANGLE,0.1)

if __name__=='__main__':
    main()
             

C++

#include "c4d.h"
#include "../mkmodeler/description/opolyreduxgen.h"
void SampleFunction()
{
    BaseDocument *pDoc = GetActiveDocument();
    BaseObject *pObject = BaseObject::Alloc(Opolyreduxgen);
    pDoc->InsertObject(pObject);
    pDoc->StartUndo();
    pDoc->AddUndo(UNDO_NEW,pObject);
    pDoc->EndUndo();
    EventAdd(EVENT_FORCEREDRAW);
    
    //You can set parameters two different ways. 

    //First way              
    //Some objects do not store all their data in the container. You need to use GetParameter()/SetParameter() instead. 

    DESCFLAGS_SET flags = DESCFLAGS_SET_PARAM_SET;
    pObject->SetParameter(DescID(POLYREDUXOBJECT_REDUCE_ALL_AS_ONE),GeData(true),flags);
    pObject->SetParameter(DescID(POLYREDUXOBJECT_STRENGTH),GeData(0.1),flags);
    pObject->SetParameter(DescID(POLYREDUXOBJECT_TRIANGLE_COUNT),GeData(1),flags);
    pObject->SetParameter(DescID(POLYREDUXOBJECT_VERTEX_COUNT),GeData(1),flags);
    pObject->SetParameter(DescID(POLYREDUXOBJECT_REMAINING_EDGES_COUNT),GeData(1),flags);
    pObject->SetParameter(DescID(POLYREDUXOBJECT_PRESERVE_3D_BOUNDARY),GeData(true),flags);
    pObject->SetParameter(DescID(POLYREDUXOBJECT_PRESERVE_UV_BOUNDARY),GeData(true),flags);
    pObject->SetParameter(DescID(POLYREDUXOBJECT_REDUCE_BOUNDARY_ANGLE),GeData(0.1),flags);
    pObject->Message(MSG_UPDATE);            

    //Second way, using the base container.
    BaseContainer *bc =     pObject->GetDataInstance();
    bc->SetBool(POLYREDUXOBJECT_REDUCE_ALL_AS_ONE,true);
    bc->SetFloat(POLYREDUXOBJECT_STRENGTH,0.1);
    bc->SetInt32(POLYREDUXOBJECT_TRIANGLE_COUNT,1);
    bc->SetInt32(POLYREDUXOBJECT_VERTEX_COUNT,1);
    bc->SetInt32(POLYREDUXOBJECT_REMAINING_EDGES_COUNT,1);
    bc->SetBool(POLYREDUXOBJECT_PRESERVE_3D_BOUNDARY,true);
    bc->SetBool(POLYREDUXOBJECT_PRESERVE_UV_BOUNDARY,true);
    bc->SetFloat(POLYREDUXOBJECT_REDUCE_BOUNDARY_ANGLE,0.1);
    pObject->Message(MSG_UPDATE);                                                      
}