IDs and information for Oremesh

Oremesh

Attributes

• ENGLISH NAME : Remesh
• NAME : Oremesh
• INCLUDE : Obase
• PATH : objects/description/oremesh.res
• PLUGIN : objects
• MAXON online help (may not exist): OREMESH

Elements

ID	UI Name	Type	Parameters	Cycle
ID_REMESH_POLYGONTYPE	PolygonType	LONG		ID_REMESH_POLYGONTYPE_QUADRANGLES Quad-dominant ID_REMESH_POLYGONTYPE_TRIANGLES Triangles
ID_REMESH_POLYGONTARGET_MODE	PolygonTargetMode	LONG		ID_REMESH_POLYGONTARGET_MODE_ABSOLUTE PolygonCount ID_REMESH_POLYGONTARGET_MODE_MESHDENSITY MeshDensity
ID_REMESH_POLYGONSCALE	MeshDensity	REAL	UNIT PERCENT MIN 1 MINSLIDER 1 MAX 10000.0 MAXSLIDER 500.0 STEP 1 CUSTOMGUI REALSLIDER
ID_REMESH_POLYGONTARGET	PolygonCount	LONG	MIN 1 MAX 5000000
ID_REMESH_KEEPOUTLINE	KeepOutline	BOOL
ID_REMESH_CREASES	KeepCreases	BOOL
ID_REMESH_EDGEANGLE	EdgeAngle	REAL	UNIT DEGREE MIN 0.0 MINSLIDER 0.0 MAX 180 MAXSLIDER 180 CUSTOMGUI REALSLIDER
ID_REMESH_SMOOTHITERATIONS	SmoothIterations	LONG	MIN 0 MAX 100
ID_REMESH_QUADONLY	OnlyQuadrangles	BOOL
ID_REMESH_GUIDE_SPLINES	FlowSplines	IN_EXCLUDE	NUM_FLAGS 1 INIT_STATE 1 IMAGE_01_ON 300000131 IMAGE_01_OFF 300000130

Example Code

The following code does not use the correct values when setting the data. You should check directly in C4D for the correct values that you should use in place of the ones that are shown. This code is just to show you how to access the values for getting and setting the parameters.

Python

import c4d
from c4d import gui
def main():
    obj = c4d.BaseObject(c4d.Oremesh)
    doc.InsertObject(obj)
    c4d.EventAdd(c4d.EVENT_FORCEREDRAW)
    
    #You can set parameters two different ways. 
    #First way              
    obj[c4d.ID_REMESH_POLYGONTYPE] = c4d.ID_REMESH_POLYGONTYPE_QUADRANGLES
    obj[c4d.ID_REMESH_POLYGONTARGET_MODE] = c4d.ID_REMESH_POLYGONTARGET_MODE_ABSOLUTE
    obj[c4d.ID_REMESH_POLYGONSCALE] = 0.1
    obj[c4d.ID_REMESH_POLYGONTARGET] = 1
    obj[c4d.ID_REMESH_KEEPOUTLINE] = True
    obj[c4d.ID_REMESH_CREASES] = True
    obj[c4d.ID_REMESH_EDGEANGLE] = 0.1
    obj[c4d.ID_REMESH_SMOOTHITERATIONS] = 1
    obj[c4d.ID_REMESH_QUADONLY] = True
    
    #Second way, using the base container.
    bc = obj.GetDataInstance()
    bc.SetInt32(c4d.ID_REMESH_POLYGONTYPE,c4d.ID_REMESH_POLYGONTYPE_QUADRANGLES)
    bc.SetInt32(c4d.ID_REMESH_POLYGONTARGET_MODE,c4d.ID_REMESH_POLYGONTARGET_MODE_ABSOLUTE)
    bc.SetFloat(c4d.ID_REMESH_POLYGONSCALE,0.1)
    bc.SetInt32(c4d.ID_REMESH_POLYGONTARGET,1)
    bc.SetBool(c4d.ID_REMESH_KEEPOUTLINE,True)
    bc.SetBool(c4d.ID_REMESH_CREASES,True)
    bc.SetFloat(c4d.ID_REMESH_EDGEANGLE,0.1)
    bc.SetInt32(c4d.ID_REMESH_SMOOTHITERATIONS,1)
    bc.SetBool(c4d.ID_REMESH_QUADONLY,True)

if __name__=='__main__':
    main()
             

C++

#include "c4d.h"
#include "../objects/description/oremesh.h"
void SampleFunction()
{
    BaseDocument *pDoc = GetActiveDocument();
    BaseObject *pObject = BaseObject::Alloc(Oremesh);
    pDoc->InsertObject(pObject);
    pDoc->StartUndo();
    pDoc->AddUndo(UNDO_NEW,pObject);
    pDoc->EndUndo();
    EventAdd(EVENT_FORCEREDRAW);
    
    //You can set parameters two different ways. 

    //First way              
    //Some objects do not store all their data in the container. You need to use GetParameter()/SetParameter() instead. 

    DESCFLAGS_SET flags = DESCFLAGS_SET_PARAM_SET;
    pObject->SetParameter(DescID(ID_REMESH_POLYGONTYPE),GeData(ID_REMESH_POLYGONTYPE_QUADRANGLES),flags);
    pObject->SetParameter(DescID(ID_REMESH_POLYGONTARGET_MODE),GeData(ID_REMESH_POLYGONTARGET_MODE_ABSOLUTE),flags);
    pObject->SetParameter(DescID(ID_REMESH_POLYGONSCALE),GeData(0.1),flags);
    pObject->SetParameter(DescID(ID_REMESH_POLYGONTARGET),GeData(1),flags);
    pObject->SetParameter(DescID(ID_REMESH_KEEPOUTLINE),GeData(true),flags);
    pObject->SetParameter(DescID(ID_REMESH_CREASES),GeData(true),flags);
    pObject->SetParameter(DescID(ID_REMESH_EDGEANGLE),GeData(0.1),flags);
    pObject->SetParameter(DescID(ID_REMESH_SMOOTHITERATIONS),GeData(1),flags);
    pObject->SetParameter(DescID(ID_REMESH_QUADONLY),GeData(true),flags);
    pObject->Message(MSG_UPDATE);            

    //Second way, using the base container.
    BaseContainer *bc =     pObject->GetDataInstance();
    bc->SetInt32(ID_REMESH_POLYGONTYPE,ID_REMESH_POLYGONTYPE_QUADRANGLES);
    bc->SetInt32(ID_REMESH_POLYGONTARGET_MODE,ID_REMESH_POLYGONTARGET_MODE_ABSOLUTE);
    bc->SetFloat(ID_REMESH_POLYGONSCALE,0.1);
    bc->SetInt32(ID_REMESH_POLYGONTARGET,1);
    bc->SetBool(ID_REMESH_KEEPOUTLINE,true);
    bc->SetBool(ID_REMESH_CREASES,true);
    bc->SetFloat(ID_REMESH_EDGEANGLE,0.1);
    bc->SetInt32(ID_REMESH_SMOOTHITERATIONS,1);
    bc->SetBool(ID_REMESH_QUADONLY,true);
    pObject->Message(MSG_UPDATE);                                                      
}